Publicité
Les langues disponibles
Les langues disponibles
7. Administration
7.1 Local Console OSD
Upon logging into the Local Console OSD, the main page appears (see
figure). Administrators have access to all features in the OSD, whereas
Users have access to everything except the F4 Admin page and the
F6 Broadcast (BRC) function. The Local Console OSD administrative
settings are described in the following section.
7.1.1 Local Console OSD F2 LIST Function
This function lets you tailor the list of ports the OSD will display on the Main Screen. The submenu choices and their meanings are given in the
table:
Note: The ports that are displayed in the OSD main screen are the only ports that will be affected under Broadcast Mode. (See page 14 for
details on Broadcast Mode.)
Setting
Description
ALL
Lists all of the ports on the installation that are accessible to the logged-on user, whether they are powered-ON or not.
POWERED ON
Lists all of the ports on the installation that are both accessible to the logged-on user and powered-ON.
QVIEW
Lists all of the ports on the installation that are set as Quick View ports by an administrator. (See page 28 for details on Quick View
ports.)
QVIEW + POWERED ON
Lists all of the ports on the installation that are both set as Quick View ports by an administrator and are powered ON.
7.1.2 Local Console OSD F3 Settings (SET) Page
This function allows each User and Administrator to set up their working environment. A separate profile for each is stored by the OSD and is
activated according to the username and password provided during login. To change a setting:
1) Double-click on it, or highlight it and press the [Enter] key.
2) After you select an item, a submenu with more choices will appear. To make a selection, double-click on a choice or highlight it and press the
[Enter] key.
( continued )
28
Publicité
