Publicité
Les langues disponibles
Les langues disponibles
EN INSTRUCTIONS ON ASSEMBLY AND USE
CONGRATULATIONS ON
PURCHASING THIS PRODUCT!
Please read these instructions carefully. The instructions are an integral
component of the product. Therefore, please store them and the packaging
carefully in case questions arise in the future. Please always include these
instructions when giving the product to a third party. This product must be
assembled by an adult. This product is designed for private/domestic use
only. This product is not designed for commercial / industrial use. The use
of the product requires certain capabilities and skills. Always adjust accor-
ding to the age of the user and use for the purpose it has been designed for.
TECHNICAL SPECIFICATIONS
Item:
Item number:
Dimensions when assembled: 213 x 152 x 76 cm
Purpose:
If you have assembly problems or would like further information on the
product, we have all you need and more at http://www.hudora.de/.
CONTENTS
20 Goalposts
1 Goal net
5 Tent pegs (for stand fixing)
6 Tent pegs (for fixing the target shot)
1 Screw set
4 Cords
1 Target shot
1 Manual
Other items included are meant to facilitate safe transportation and are not
required for the installation and use of the product.
SAFETY INSTRUCTIONS
• WARNING! Not suitable for children under 36 months due to long cords!
Strangulation Hazard.
• WARNING! do not climb on the goal frame or net or hang from the goal
posts. There is a serious risk of injury!
• Prior to use, check all parts of the goal for damages and correct assem-
bly. In this regard, it is important to check the connecting elements and
screw connection for stability and fit. Any sharp edges that might have
formed must immediately be removed!
• Children should only use the product when they are under adult super-
vision.
• No liability is assumed for damages resulting from incorrect application
of the instruction manual.
INSTRUCTIONS ON ASSEMBLY
Notice: Lubricate the connection assemblies on the narrow ends a bit be-
fore starting the assembly. That facilitates the assembly and extends the
durability of the product!
1. Assembly of the goal frame
Assemble the goal frame as indicated in fig. 1. Observe that you use the
respectively numbered tubes.
2. Assembly of the goal net
The little flags sewed in the net indicate the upper goal corners. Fasten the
goal net by threading the cord as indicated in fig. 2 around the tubes and
knotting the loose ends.
All images are examples of the design.
Soccer goal Trainer with target shot
76920, 76923
Soccer goal for versatile shooting and goal-
keeper training.
UKAR Contact: UKCA Experts Ltd. | Dept 302, 43 Owston Road |
Carcroft, Doncaster, DN6 8DA | United Kingdom
3. Assembly of the target shot
Spread the target shot and fasten it on the crossbar and the sides of the
goal frame by means of the rubber cords and plastic clips; then secure with
pegs the bottom line on the ground as indicated in fig. 3. Pay attention that
the clips are on the back side of the goal wall so that they cannot be hit by
the ball.
4. Stand locking of the goal
Finally fix the goal frame by means of the pegs on the ground. Ascertain
that the ground is suitable for the application of pegs (e.g. no water pipes
for sprinkler devices!). Make sure that the pegs are completely driven into
the ground and have firm position. Avoid protruding fastenings (risk of
stumbling). On too hard grounds the goal must be saved by appropriate
measures in another way against overturning in order to prevent risk of
injuries. Never play with an unsecured goal or never leave the goal unse-
cured respectively.
USAGE INSTRUCTIONS
• Only set up the goal on level ground.
• Please keep a minimum distance of at least 3 m to any surrounding
obstacles.
• Secure the goal to keep it from toppling over – even if not in use.
• Avoid exposing the product unnecessarily to bad weather conditions.
Keep it in a cool and dry storage area.
• Check for any rust on the product and remove it immediately. Pushing
together the metal parts could lead to the protective layer being scrat-
ched and rust developing.
MAINTENANCE AND STORAGE
Use a dry or damp cloth only to clean the product; do not use special
cleaning agents! Check the product for damage or traces of wear and tear
before and after each use. Do not make any structural changes. For your
own safety, please use original spare parts only. These can be sourced
from HUDORA. If parts become damaged or if sharp edges or corners
should develop, the product may not be used any more. If in any doubt, ple-
ase contact our service team (http://www.hudora.de/). Store the product in
a safe place where it is protected from the elements, cannot be damaged,
and cannot injure anyone.
DISPOSAL ADVICE
At the end of the product's life, please dispose of it at an appropriate collec-
tion point provided in your area. Local waste management companies will
be able to answer your questions on this.
SERVICE
We make every effort to deliver faultless products. If faults do arise how-
ever, we put just as much effort into rectifying them. Therefore, you can
find numerous information on the product, replacement parts, solutions to
problems and lost assembly manuals at http://www.hudora.de/.
4/12
Publicité
