Fig. 7
Operating the product
Display overview
Evaporator fan symbol
Defrost symbol
Compressor symbol
Light key (only on glass door cabinets)
When the product is connected to main supply a short boot sequence is performed. During
this all light segments in the display are lit.
After that, the controller starts up in normal operation mode.
If the cabinet is not turned on when connecting it to main supply, the display will show oFF.
To turn the cabinet on, push and hold
The controller starts up in normal operation mode displaying the current cabinet temperature.
The refrigeration system will follow the factory default set temperature:
765042402
Temperature alarm symbol
Keylock symbol
for 5 seconds.
Rev. 005
- key
+ key
P key
On/off key
Alarm key
36