Table des Matières
Publicité
Failure
(1) The pump does not
operate. LED "Pump on"
is not lit.
36
Cause
(a) The Foodtimer is active.
(b) The connecting cable
from the driver to the
Multicontroller has no
contact or is defective.
(c) The Turbelle
®
defective.
(d) No pump has been
connected up to socket
(9) or (11).
Remedy
(a) Break of approx. 5 to 10
minutes – wait until the
pump starts operating
automatically.
(b) Check the cable, and
replace it, if and when
necessary.
(c) Check
pump is
Turbelle
without the Foodtimer;
replace the pump if and
when necessary.
(d) At least one pump has to
be connected to socket
(8) or (10).
whether
the
®
will operate
Publicité
Table des Matières
