Publicité
Les langues disponibles
Les langues disponibles
9.5 Change-over button and F button (standard settings)
The change-over button
The following functions are set as per standard (<defaul>) in the different weigh-
ing applications:
Short key pressing
➢ When pressed for first time:
Weih
➢ Switch-over between the
➢ When pressed for first time:
count
➢ Switch-over between the
check
➢ When pressed for first time:
➢ Switch-over between the
Short key pressing
➢ Open PRE-TARE settings
Weih
➢ Setting the reference quantity
count
➢ Open settings for check-
check
Short key pressing
Weih
➢ Select application
count
check
TKXC-TM-A-BA_IA-def-2310
and the F button can be allocated with different functions.
Setting weighing unit
weighing units
Setting the reference quantity
weighing units
Setting weighing unit
weighing units
weighing
Long key pressing
➢ Display gross weight value
➢ When the balance has been tared
and the weighing unit is displayed,
you can change the display be-
tween gross weight, net weight
and tare weight by pressing the
button long time.
➢ When the balance has been tared
and the weighing unit is displayed,
you can change the display be-
tween gross weight, net weight
and tare weight by pressing the
button long time.
Long key pressing
➢ Carry out Data-Hold function
No function assigned
➢ Open settings for target weighing
Long key pressing
No function assigned
25
Publicité
