Publicité
Les langues disponibles
Les langues disponibles
11 Application <Weighing>
How to carry out a simple weighing and taring, please refer to chap. 9.2 or 9.4. Fur-
ther specific settings you will find in the following chapters.
Shouldn't the application <Weighing> already be enabled, select the menu
setting < mode > < weih >, see chap. 10
11.1 Application-specific settings
Call up menu:
Press the TARE key and hold it until < apcmen> is displayed.
The display changes to < wghmod> followed by < Ptare>.
Navigation in menu see chap. 14.1
Overview (not verifiable models):
Level 1
Ptare
PRE-TARE
hold
Unit
Units
mode
Applications
30
Level 2
Level 3
Take over the placed weight as PRE-TARE value,, see
actuAl
chap. 11.2.1
manuAl
Numerical input of the tare weight, see chap. 11.2.2
CLEAR
Delete PRE-TARE value
-
Start-Hold function, see chap. 11.3
available weigh-
This function defines in which weighing unit the result will be
ing units, see
displayed, see chap. 11.4.1
chap. 1
Application unit counting
pcs
FFA
Multiplication factor see chap. 11.4.2
Application unit for determining percentages
%
see chap. 11.4.3
wei h
Weighing
count
Counting
check
Check weighing
Description / Chapter
TKXC-TM-A-BA_IA-def-2310
see chap. 10
Publicité
