Maytag MRT118FFFE Guide De Démarrage Rapide

OPERATING INSTRUCTIONS
WARNING: To reduce the risk of fire, electric shock, or injury to persons, read the IMPORTANT SAFETY
INSTRUCTIONS, located in your appliance's Owner's Manual, before operating this appliance.
IMPORTANT: Before operating this appliance, make sure it has been properly installed according to the
appliance's Owner's Manual.
Your refrigerator has two controls that affect the temperature. The Temperature control is located at the
top front of the refrigerator compartment and the Airflow control is located on the back wall of the freezer
compartment.
TEMPERATURE CONTROL
For your convenience, the temperature control is preset at the factory. When you first install your
refrigerator, make sure the control is still preset as shown above.
IMPORTANT:
� The recommended setting should be correct for normal household refrigerator use. The controls are
set correctly when milk or juice is as cold as you like and when ice cream is firm.
� Wait 24 hours for your refrigerator to cool completely before adding food. If you add food before the
refrigerator has cooled completely, your food may spoil.
NOTE: Adjusting the refrigerator and freezer controls to a colder than recommended setting will not
cool the compartments any faster.
� If the temperature is too warm or too cold in the refrigerator or freezer, first check the air vents to be
sure they are not blocked before adjusting the controls.
COOLING ON/OFF
� To turn cooling off, press and hold Temp Setting for 4 seconds until all lights stay on for 1 second. To
turn cooling back on, press and hold Temp Setting again for 4 seconds.
NOTE: Neither compartment will cool when the control is set to Off.
ADJUSTING THE TEMPERATURE CONTROL
If you need to adjust the temperature in either the refrigerator or freezer compartment, use the settings
listed in the chart below as a guide.
NOTE: Except when starting the refrigerator, do not adjust the control more than one setting at a time.
Wait 24 hours between adjustments for the temperature to stabilize
� Press the Temp Setting button to toggle among the four LED lights which indicate the temperature
setting. Reading from left to right, the LED in the first position is the least cold. The LEDs indicate
increasingly colder settings as you continue to the right until all four LEDs are illuminated.
NOTE: For the first to fourth setting, only one LED of the four LEDs will be lit. All four LEDs will be lit
when you have reached the coldest setting.
CONDITION/REASON
Refrigerator too warm
Refrigerator too cold
Freezer too warm/too little ice*
Freezer too cold
*Ice makers and Ice maker kits are available on select models. See online Owner's Manual.
W11401462C
Top Mount Refrigerator Quick Start Guide
Recommended Settings
ADJUSTMENT
Temp control one setting higher
Temp control one setting lower
Airflow or Temp control one setting higher
Airflow or Temp control one setting lower
PowerCold ® FEATURE
The PowerCold ® feature sets the freezer and refrigerator to the lowest temperature settings to assist with
periods of high refrigerator use, full grocery loads, or temporarily warm room temperatures.
� To turn on the PowerCold ®
feature, press Temp Setting continually until all the LED lights are blinking
on/off progressively from left to right. Press Temp Setting again to return to the Cold set point.
NOTE: Depending on the environment conditions, the PowerCold
to 24 hours. When the feature turns off, the temperature will return to the recommended set point.
AIRFLOW CONTROL
The Airflow control regulates the amount of air flowing between the freezer and the refrigerator
compartments. Changing the Airflow setting to Min removes cool air from the freezer and uses it to cool
the refrigerator.
When you plug in the refrigerator for the first time, turn the Airflow control to the Recommended setting.
ADJUSTING THE AIRFLOW CONTROL
� Max - Increase airflow to the freezer
� Min - Increase airflow to the refrigerator
IMPORTANT: Once the performance is achieved, return the Airflow control to the recommended
setting to keep the refrigerator operating at optimum efficiency.
CONDITION/REASON
Heavy ice use*
Hot room temperature
Large quantity of groceries
*Ice makers and ice maker kits are available on select models. See online Owner's Manual.
Online Ordering Information
For detailed installation instruction and maintenance information, winter storage, and transportation tips,
please see the Owner's Manual included with your appliance.
For information on any of the following items, the full cycle guide, warranty, detailed product dimensions,
or for complete instructions for use and installation, please visit www.maytag.com/owners, or in
Canada www.maytag.ca/owners. This may save you the cost of a service call.
However, if you need to contact us, use the information listed below for the appropriate region.
United States:
1–800–344–1274
Maytag Brand Appliances
Customer eXperience Center
553 Benson Road
Benton Harbor, MI 49022–2692
SAVE THESE INSTRUCTIONS
® feature will remain activated for up
ADJUSTMENT
Max
Max – to maintain ice making production rate
Min – to quickly chill food and beverages
Canada:
1–800–807–6777
Maytag Brand Appliances
Customer eXperience Centre
200–6750 Century Ave.
Mississauga, Ontario L5N 0B7