Volvo TOW BAR-MOUNTED BICYCLE HOLDER Mode D'emploi page 8

TOWBAR-MOUNTED BICYCLE HOLDER
en-GB
9. Unscrew the knob to prepare the
installation of the frame holder on the
support bar.
10. Clamp the frame holder into the support
frame as illustrated.
8
11. Make sure that you slide over the
attachment ring when the clamp is aligned
in position on the support frame.
Transportation
– Fit the bicycle on the bicycle holder.
If several bicycles are being loaded on
the bicycle holder, fit them in opposite
directions with the heaviest bicycle on the
inside.
– Check that the handlebars of the inside
bicycle do not make contact with the car's
tailgate. If necessary, loosen and turn the
handlebars, or move the bicycle out one
position.