Publicité
Similar mechanism with individual weight adjustmen
A Height of the seat
Lowering the seat:
Sit down on the seat
®
1.
button upwards (the seat will drop slowly)
the button at the desired height will lock the position
Raising the seat:
Stand up
®
1.
wards (the seat will rise slowly)
at the desired height will lock the position
B Adjusting the backrest tilt
Adjusting the position of the backrest (3 locking posi-
tions):
Lean against the backrest
1.
upright, middle, reclined far back (26 degrees)
J
K
G
Pull the
2.
Releasing
3.
Pull the button up-
2.
Releasing the button
3.
Turn the lever =
2.
C Strength of the backrest
pressure
Increasing the backrest
®
pressure:
Take your weight
1.
off the backrest
Turn the
2.
quick adjustment mechanism
to the front
Reducing the backrest
®
pressure:
Take your weight
1.
off the backrest
Turn the
2.
quick adjustment mechanism
to the rear
H
A
C
H
D Height of backrest (optional)
Increasing the height of the backrest:
®
hands, grip the backrest from below and push upwards
Release once at the desired height = lock in position
2.
Release lock:
Push backrest all the way up, and
®
1.
the lock will release
Move backrest all the way down
2.
E Depth of the seat (optional)
Adjusting the seat depth:
and hold it
Push the cushion to the desired position
2.
Release the finger plate, and the seat will engage
3.
F Adjusting the seat tilt (optional)
Take your weight off the seat
1.
the way up and lock it (the seat tilts forward by 5°)
or move it down and lock it (the seat tilts back to its
original position)
G Adjusting the height and depth of the lumber
support (optional)
Adjusting the height:
®
1.
rest
Move the lumbar support with both hands
2.
Release the lumbar support in the desired position
3.
Adjusting the depth:
®
1.
Adjust and secure the depth of the lumbar support
2.
Close the lever again = the lumbar depth is set
3.
H Adjusting the armrests
To adjust the height of the armrests:
®
the button
Raise or lower the armrest to the desired
2.
height
Release the button to lock the armrest
3.
To adjust the depth of the armrests (3-D/4-D):
®
slide the armrest cover backwards or forwards;
it will lock in place automatically
Adjusting the support surfaces to any position (4-D):
®
forward and backward, rotatable to the right and left
by 360°
Changing the clear width (2-D/3-D/4-D):
®
the armrest lever under the seat
into the desired position
J Neck support (optional)
Adjusting the neck support: Slide to the desired height
(stepless) and adjust the tilt position
K Coat hanger (optional)
Maximum user weight is 15 kg. The coat hanger is not
suitable for pushing or pulling the chair.
Using both
1.
Pull the button upwards
1.
Move the lever all
2.
Do not lean against the back-
Open the middle lever upwards
Press and hold
1.
Release
1.
Push the armrest
2.
Tighten the lever again
3.
English 19
Publicité
