Panasonic SC-PM22 Manuel D'utilisation page 8

Before use a
ROT5238 | a
Insert the batteries observing the
_ correct polarities (®, ©).
=F Remote control signal
sensor
About 7 meters in front
of the signal sensor `
OPEN/CLOSE
es A
ee
a. memm ee ee ee om
Concerning the remote control |
eme ee ne er te ee Le ce ee ee ee — ee en
m-
Marenne aanne Mic. |
Use of batteries
eDo not mix old and new batteries, or batteries of different types
(manganese and alkaline, etc.).
eNever subject batteries to excessive heat or flame; do not attempt
to disassemble them; and be sure they are not short-circuited.
elf the remote control is not to be used for a long period of time, re-
move the batteries and store them in a cool, dark place.
Do not attempt to recharge alkaline or manganese batteries. .
eDo not use rechargeable type batteries.
Operation notes
eDo not place obstacles between the remote control signal sensor
and remote control unit.
eDo not expose the remote control signal sensor to direct sunlight or
to the bright light of a fluorescent light.
®Take care to keep the remote contro! signal sensor and end of the
remote control unit free from dust. .
eli this system is installed in a rack with glass doors, the glass doors'
thickness or color might make it necessary to use the remote con-
trol a shorter distance from the system.
To prevent damage
®Do not place heavy items on the remote control.
Do not disassemble or reconstruct.
eDo not spill water or other liquids on the remote control.
Em Pay
Opening/closing the glide panel
=
When the unit is turned on, the glide panel retracts automatically ena-
bling access to the operation buttons.
When the unit is turned off, the glide panel closes automatically.
To open/close the glide panel manually
Press [OPEN/CLOSE] when the unit is on.
When the glide panel is closed manually, the display light dims.