Publicité
Les langues disponibles
Les langues disponibles
Before
use
=
+
| Connections
|
Cm
ton
rte
ee
tn me
ns
+ E R
EEE)
ePlug the AC power supply cord into a household AC outlet only after
all other connections have been made.
eTo prepare the AM loop antenna wire and speaker cords, twist the
vinyl cover tip and pull off.
eFor your listening pleasure, keep your speakers from touching the
system.
l
eThese speakers are designed identically so that no left or right
channel orientation is necessary.
Connect the FM indoor antenna.
Tape the antenna to a wall or column, in a position where radio
signals are received with the least amount of interference.
For best reception:
. An FM outdoor antenna is recommended. (= page 7)
menesive ape
Connect the AM loop antenna.
;
After attaching the antenna, turn on the system and tune in a
FM indoor antenna
broadcast station. Then, turn the antenna to the angle of best
:
reception and least interference..
@ Connect the right (R) and left (L) speaker
` cords (pintype).
°
@ Connect the right (R) and left (L) speaker
cables.
Keep your speakers at least 10 mm ("3/32") away from the
system for proper ventilation.
eTo prevent damage to circuitry, never short-circuit positive (+)
and negative {(—) speaker wires.
Be sure to connect only positive (red) wires to positive (+) ter-
minais and negative (black) wires to negative (—)} terminals.
eThese speakers do not have magnetic shielding. Do not place
them near televisions, personal computers or other devices
easily influenced by magnetism.
Ch" loop antenna
Caution
eUse the speakers only with the recom-
mended
system.
Failure to do so may
lead to damage to the amplifier and/or the
speakers, and may result in the risk of
fire. Consult a qualified service person if
damage
has occurred
or if you experi-
ence a sudden change in performance.
eDo not attach these speakers to walls or
ceilings.
E] Connect the AC power supply cord.
The included AC power supply cord is for use with this unit
only. Do not use it with other equipment.
Publicité
