Publicité
Les langues disponibles
Les langues disponibles
Timer
operations
a
RQT5238
Using the timer
Using the play/record timer
To switch the timer OFF
:
Press [© PLAY/©
REC] and check "© PLAY" (for play timer) or
"© REC" (for record timer) goes out.
If you set the timer incorrectly
Repeat the procedure from step EI.
To check settings
Press
[CLOCK/TIMER]
to select "©
PLAY"
(for play timer) or
"© REC" (for record timer).
Two seconds later, the display will change in the following order;
®© Start time
@ End time
@ Source
@) Volume (play timer only)
You can check the settings even when the system is OFF.
To enjoy the desired source after the timer setting is
completed
Even if you change the volume tevel or music source, the timer will
start with the preset condition.
l
1. Following step Fi, start playing the desired source.
2. Press (POWER(C)/I] to standby mode after enjoying the source,
and confirm a CD or tape has been inserted.
Be sure to reset tape in the direction you want the tape to play/
record on timer,
i
Turning the timer ON/OFF
As long as "© PLAY" or "© REC" is displayed, the timer will come ON
everyday as set.
You can turn the timer ON/OFF by pressing [© PLAY/® REC] while
the system is OFF.
Remember that when "© PLAY" or "© REC" is displayed, the timer is
ON. When not displayed, the timer is OFF.
elfthe power is on, the timer will not function. The system must be in
the standby mode.
f
eif you switch the power to the standby mode while the play/record
timer is functioning, the OFF time setting will not be activated.
elf AUX is selected as the source, when the timer comes ON, the
system will turn ON and will engage "AUX" as the source. If you
want to playback or record from a connected component, set the
- component's timer to the same time. (See the instruction manual
that came with the component.)
Publicité
