Publicité
Les langues disponibles
Les langues disponibles
| Recording CDs
|
a
ed
| | Normal recording |
eTracks are recorded in the order in which they are found on the CD.
eTracks are cut in the middle when the end of the tape is reached.
e You can record from any point on the tape.
Press [A OPEN] and insert the tape.
Close the holder by hand.
Tape direction is automatically set to "F>".
2 Press [REV MODE] on the remote control to se-
lect the reverse mode.
Each time you press the button;
Z>
Te:
One side is recorded, then recording stops auto-
matically.
772, c>:
Both sides (front side—»reverse side} are recorded,
then recording stops automatically.
Press [5] to select the CD mode.
Press [4 OPEN/CLOSE] to open the CD tray.
Insert the CD with label facing upward.
Press [4 OPEN/CLOSE} to close the CD tray.
5 Press [@/@ 11 REC/REC PAUSE] to start re-
cording.
elf you selected "c72" in step E, the direction will automatically
change to "522" when recording starts.
The recording will start from the first track.
To stop recording
eTo add a 4 second silent interval before stopping
Press [W] on the CD control section.
The CD will stop and the cassette deck will go into the recording
standby mode.
To cance! the recording standby mode, press [W] on the cassette
deck control section.
eTo stop recording without a silent interval
Press [W] on the cassette deck control section.
The recording will stop and the CD will go on.
To stop recording temporarily
Press [@/@ I} REC/REC PAUSE}.
To resume recording, press [@/@ 11 REC/REC PAUSE],
To record on reverse side
.
Before recording, press [<4 > ] twice and immediately thereafter [W].
The tape direction will be shown as "<5".
To record from a specific point on a tape
Before recording, advance the tape to the point from where you want
to start recording.
To record programmed tracks
1. After step EX, program the track(s) you want (= steps J-E on
page 15).
2. Press (@/@ 14 REC/REC PAUSE] to start recording.
Recording
operations
és
|
|
|
|
Publicité
