Fronius Ohmpilot Guide De Démarrage Rapide page 7

Set Heater 2 - Example 3
11a
Select „SG ready heat pump" and set power limits
Set Heater 2 - Example 5 / 6
11c
Select „Three-phase" and set power limit
Activate legionella prevention
12
Select „Legionella protection" and time intervall
Boost Mode (optional)
14
Activate „Boost Mode" in the device settings or with
the button on the front plate.
Set Heater 2 - Example 4
11b
Activate „temperature sensor preset", „adapt day
curve". Select „Activate external source".
Set Heater 2 - Example 7
11d
Select „Circulating pump"
Temperature Limitation
13
Select „Maximum temperature" and set limit