Manual Lighting Procedure; Shutting Off Your Griddle - Pit Boss PB200GS Manuel Du Propriétaire

MANUAL LIGHTING PROCEDURE

1. Verify that the control knob is turned to the OFF position.
2. Connect LP gas cylinder as per instructions. Turn LP gas
tank valve to OPEN.
3. Note the indicator marker on the control knob. Push in
the regulator knob and turn 90 degrees (or 1/4) counter-
clockwise to HIGH.
4. Quickly and carefully, use a lit match secured with the
lighting rod (included with the grill) to light burners.
Access the burners through the cooking grid and hot plate.
Position lit match near side of burner. Do not attempt to
light another area of the burner. This can cause injury.
NOTE: Do not use spirit, lighter-fluid or kerosene for
lighting or refreshing a fire in your griddle.
5. After the burner has caught fire, you are ready to enjoy
your griddle at your desired temperature!

SHUTTING OFF YOUR GRIDDLE

1. When finished cooking, turn LP gas tank valve to the CLOSED position, and allow the regulator knob to pop out. This
safety feature locks the regulator knob to ensure that the gas is no longer flowing.
2. Turn control knobs to the OFF position.
NOTE: A "poof" sound is normal as the last of the LP gas is burned.
3. Disconnect LP gas tank by following the Disconnect LP Gas Tank instructions.
WARNING: Allow the griddle to cool completely, and remove the gas cylinder, before moving, travel, or for
storage.
9