Bosch Smart Home controller II Notice D'utilisation page 8

Smart Home Controller II
The status LEDs (2, 3, 4) show the status of the controller using flashing
codes.
2 3 4
Power
Status
LED
Flashes
Device starting up
yellow
Lights green The device has started up
Flashes red Start-up failed
Network
Status
LED
Flashes Searching for a network
yellow connection
Network connection
Lights green
established
Flashes red Network connection failed
Cloud
Status
LED
Update is being downloaded
Flashes from the Bosch Cloud or data
yellow is being exchanged via the
tunnel connection.
Remote access via the
Lights green Bosch Cloud is activated and
established.
Bosch Cloud connection failed
and remote access to your
Flashes red
Bosch Smart Home system is
not currently possible.
↑Content
8-750-002-895 | V001 | 01/2024
Recommended action
Wait until the device has fully
started up.
None
Disconnect the Smart Home controller from
the power and reconnect it. If the LED flashes
red again, then check the internet connection;
connect the controller to another network if
possible.
Recommended action
None
None
Check your network settings.
Recommended action
None
If you do not want to access your Smart Home
system while out and about, then you can
deactivate remote access in the Smart Home
app.
Disconnect the Smart Home controller from
the power and reconnect it. If the LED flashes
red again, then check the internet connection.
English | 8
Bosch Smart Home