GOAL ZERO Sherpa 100AC Manuel D'utilisation page 2

Make sure your Goal Zero Sherpa 100AC is fully charged before using or
storing. Keep your Goal Zero Sherpa 100AC plugged in when not in use.
IMPORTANT NOTE: When solar recharging your Sherpa 100AC, take note of
the voltages of the solar panels and do not exceed 22V. Individual solar panels,
or solar panels chained in series in excess of 22V cannot be used with the Goal
Zero Sherpa 100AC and can cause serious damage to the unit. For help on
chaining solar panels, call our Customer Solutions Center at 888-794-6250.
IMPORTANT SAFETY INSTRUCTIONS
Read all instructions and cautions carefully before use to avoid personal
injury or damage to the unit and any connected products
Observe all Input/Output connectors ratings: To avoid fire or electrical
shock hazard, observe all ratings on unit, and products you intend to
use; check manuals for more information.
Use in a ventilated area: Ensure proper ventilation while in use and do
not obstruct fan openings on unit. Inadequate ventilation may cause
damage to the unit. During storage do not stack anything on top of unit.
DO NOT operate in wet conditions: In order to avoid short circuits or
electric shock do not allow unit to get wet. Let unit dry completely
Keep the unit clean and dry: Inspect the unit for dirt, dust, or moisture
Shock or Fire Hazard: This Sherpa 100AC generates the same
potentially lethal AC power as a normal household wall outlet. Please
use it carefully just like using a normal AC outlet on the wall.
DO NOT insert foreign objects into outputs or ventilation holes.
Any manipulation to the unit or its components will void all warranties.
CHARGE ME NOW
before using.
on a regular basis.