Publicité
Les langues disponibles
Les langues disponibles
Planning (Continued)
ONE-PIECE DOOR INSTALLATIONS
• Generally, a one-piece door does not require
reinforcement. If your door is lightweight, refer to the
information relating to sectional doors in Installation
Step 11.
• Depending on your door's construction, you may need
additional mounting hardware for the door bracket
(Step 11).
ONE-PIECE DOOR WITHOUT TRACK
Header Wall
Safety Reversing Sensor
ONE-PIECE DOOR WITH TRACK
Gap between floor
and bottom of door
Safety
must not exceed 1/4" (6 mm).
Reversing Sensor
Rail
Access
Door
Safety Reversing
Sensor
Gap between floor
and bottom of door must not exceed 1/4" (6 mm).
Access
Door
Safety
Reversing
Sensor
Without a properly working safety reversal system, persons
(particularly small children) could be SERIOUSLY INJURED
or KILLED by a closing garage door.
• The gap between the bottom of the garage door and the
floor MUST NOT exceed 1/4" (6 mm). Otherwise, the safety
reversal system may not work properly.
• The floor or the garage door MUST be repaired to eliminate
the gap.
Slack in chain tension
is normal when garage
Motor Unit
door is closed.
Wall-mounted
Door Control
Trolley Stop Bolt
Header
Bracket
Door Bracket
Header
Wall
CLOSED POSITION
Trolley Stop Bolt
Header
Wall
Header
Bracket
Door
Bracket
Garage
Door
5
WARNING
CAUTION
CLOSED POSITION
Trolley
Cable
Rail
Emergency
Release
Straight
Curved
Rope & Handle
Door
Door
Arm
Arm
Garage Door
Chain
Cable
Curved
Rail
Door Arm
Emergency
Release
Straight
Rope &
Door
Handle
Arm
Publicité
