Vortice CA V0 Notice D'emploi Et D'entretien page 11

ENGLISH
IMPORTANT
When installing the product vertically, the suction and
delivery points must be intubated: fig. 7.
IMPORTANT: the power cable must be of the H03VV-
F type, 2x0.75mm .
2
Wiring diagrams
See Figure 17
Connection with the optional device upon request is
foreseen to check ventilation speeds (device not
supplied in packaging):
- 17A) Vortice 3-speed selector Code 12866 o 12891.
IMPORTANT
Vortice guarantees correct product operation and
control only when paired with the Vortice 3-speed
selector (Code 12.866-12891).
Other types of connection
Alternatively, other connection diagrams are available,
associated to different control modes (devices
provided by the installer).
Connection alternative for new installation
- 13B) max
- 13C) med
- 13D) min
Machine replacement on existing system
Connection without modifications to the electrical
system: the same switches as on the existing system
will be used.
Maintenance / Cleaning
Fig 18-20.
Disposal
This product complies with Directive 2012/19/EU on
the management of waste electrical and electronic
equipment (WEEE).
The crossed-out wheeled bin symbol on
the appliance indicates that, at the end of
its life, the product should not be
discarded together with household waste
but must be taken to a separate collection
point for electrical
equipment. This will avoid negative effects
on the environment and health, and will encourage
correct treatment, disposal and recycling of the
materials from which the product is made.
Contact the municipal authority for the location of this
type of facility. Alternatively, the distributor is obliged to
take back the appliance to be disposed of free of
charge in exchange for the purchase of an equivalent
appliance.
and electronic
11