User Notes - Sedus se:flex Mode D'emploi

Function
A Height of the seat
Lowering the seat: Sit down on the seat Pull the
P 1. 2.
button upwards (the seat will drop slowly) Releasing
3.
the button at the desired height will lock the position
Raising the seat: Stand up Pull the button up-
P 1. 2.
wards (the seat will rise slowly) Releasing the button
3.
at the desired height will lock the position
E C
D
B
B Angle of the backrest
Locking the backrest: Turn handle forwards
P
= backrest is locked (backrest tilt 0°, 8°, 16°, 26°)
Releasing the lock: Turn handle back completely
P
= backrest is dynamically adjusted
F
C E
A
C Height of the lumbar support /
comfort lumbar adjustment (optional)
Adjusting the height: Do not lean against the back-
P 1.
rest Move lumbar support with both hands
2.
D Depth of the seat
Adjusting the seat depth: Pull and hold button
P 1.
Push the cushion to the desired position Release
2. 3.
the finger plate, and the seat will engage
E Adjusting the armrests
To adjust the height of the armrests: Press and hold
P
1.
the button Raise or lower the armrest to the desired
2.
height Release the button to lock the armrest
3.
To adjust the depth of the armrests: slide the armrest
P
cover backwards or forwards; it will lock in place auto-
matically
Swivel contact surfaces in any position: up to 40°
P
inwards, up to 20° outwards
F Adjustment of the headrest (optional)
Push the headrest to the desired height
P
(it is continuously adjustable)
Adjust the tilt of the headrest as desired
P

User notes

Correct use
This swivel chair is designed for a user weight of up to
130 kg and may only be used for the purpose intended
while exercising due care and attention. Using it inap-
propriately (e.g. as a stepladder, sitting on the armrests
or placing extreme weight on one side) could result in
accidents.
Castors
Different castors are available, for the sake of your
safety and for use on different types of flooring in
accordance with safety regulations:
– hard castors for soft floors (standard),
– soft castors for hard floors are optional.
Changing castors: this might be necessary, for instance,
after moving office, or after the installation of a new
floor surface – simply pull out the castors and push new
ones in. Regular cleaning of the castors increases their
service life and conserves the floor covering.
Plastic parts
Soapy water is suitable for cleaning. Please do not use
any aggressive cleaning materials.
Upholstery/membrane
Textiles should be vacuumed regularly. Remove stains
immediately with lukewarm water and a damp cloth.
In the case of light damage or soiling to the upholstery,
please only use suitable delicate cleansing agents,
or Sedus cleaning foam. The upholstery and membrane
covering of the backrest should only be changed by
skilled persons.
Leather
Leather is a natural product. The natural markings of the
animal skin gives the material its unmistakable texture.
Rub off light soiling with a soft woollen cloth. Heavier
soiling should only be treated with cleaners designed for
aniline-dyed leather. Do not expose semi-aniline leather
to direct sunshine.
Seat height adjustment
We recommend cleaning the piston rod regularly with
a cloth. Other work on the gas spring, e.g. replacement,
may only be carried out by trained staff.