Publicité
12
GRASS CATCHER
MOUNTING
ATTACHING THE GRASS CATCHER
3
CAUTION
To avoid personal injury:
¡ Shut off the engine and remove the key
before attaching the grass catcher.
{ Attaching the discharge duct
1. Park the machine on level ground, shut off the
engine and remove the key.
2. Set the cutting height for about 25 mm (1 in.), and
then lower the mower deck to the lowest position.
3. Insert the discharge duct from the platform side
and secure with 4–M8 bolts.
(1) Discharge duct
(2) 4–M8 bolts
(3) Platform
{ Dismounting the grass container
1. Park the machine on firm level ground, shut off
the engine and remove the key.
2. Remove the link plates on both sides. And remove
the back cover.
(1) Link plate
(2) M10 Bolt
(3) Rue ring cotter
3. Remove the pins on both sides from the rotating
cylinders. And turn the rods of the cylinders 90
degrees.
(1) Rotating cylinder
Publicité
