Assembly - Skil PM4910-00 Guide D'utilisation

Tondeuse à gazon sans balais 40 v, 50,8 cm (20 po)
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

ASSEMBLY

WARNING
parts, making adjustments, cleaning, or when not in use .
WARNING
is misuse and could result in a hazardous condition leading to possibly serious injury.
WARNING
recommended can result in serious personal injury.
Unpacking
First remove all the accessories from the carton, then grasp both the front part of the deck
cover and the rear handle at the same time to carefully lift the mower up and out of the
carton.
Inspect the product carefully to make sure that no breakage or damage occurred during
shipping.
Do not discard the packing material until you have carefully inspected and satisfactorily
operated the mower.
If any parts are damaged or missing, please return the mower to the place of purchase.
Assemble the Grass Bag
1. Check the grass bag before assembling, to make sure that there is no damage.
2. Remove the rubber protection tubing for the grass bag hooks (Fig. 2).
3. Slide the grass bag onto the frame (Fig. 2).
4. Assemble the top clips to the frame (Fig. 3), then assemble the two side clips. Assemble
the bottom clip last.
5. The completely assembled grass bag is shown in Fig. 4.
Fig. 2
14
To prevent accidental starting that could cause serious personal
injury, always remove the battery pack from the tool when assembling
Do not attempt to modify this tool or create accessories not
recommended for use with this tool . Any such alteration or modification
Do not use any attachments or accessories not recommended by the
manufacturer of this product . The use of attachments or accessories not
Fig. 3
Fig. 4
Clips

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Sm4910-00

Table des Matières