Skil PM4910-00 Guide D'utilisation page 20

To start the mower (Fig . 13)
1. Attach the battery pack to the mower and close the battery-pack cover.
2. Depress the safety button.
3. With the safety button depressed, pull the bail switch upward to meet the handle. The
mower will start.
4. Release the safety button.
To stop the mower (Fig . 14)
1. Fully release the bail switch.
2. The electric brake will stop the blade rotation within 3 seconds of the bail switch release.
Fig. 13
Self-Propel System (model
SM4910-00 only)
The SM4910-00 mower is equipped with self-
propel function. This system is independent of
the blade On-Off switch and it is not dependent
on blade rotation. For example, when you have
completed cutting your lawn, you can use the
self-propel to propel the mower back to your
storage location without blade rotation. You
may also choose to operate the mower as a
non-self-propelled mower to maximize battery
running time.
To operate the self-propel system without
blade rotation, pull the self-propel lever to the
handle.
To turn the self-propel off, release the self-propel trigger (Fig. 15).
The system has a speed-adjustment knob.
Rotate the knob to adjust the mower self-propel speed according to your need.
To operate with the blade rotating for cutting:
1. Depress the safety button.
2. With the safety button depressed, pull the bail switch upward to the handle and release
the safety button.
20
Fig. 14
Safety
Button
Fig. 15 Self-Propel Lever
Self-Propel Speed Adjustment Knob
Bail Switch