Skil PM4910-00 Guide D'utilisation page 23

For the best mulching performance, set the cutting height to remove approximately one third
•
of the grass-blade length, ideally no more than 1-1/2'' at one time. If the grass is overgrown,
it may be necessary to increase the cut height to make it easier to mow and to prevent
overloading the motor. Slow your cutting pace in tall or thick grass conditions. For mulching
extremely thick or tall grass, it is advisable to first cut at a high cutting-height setting, and
then re-cut to the final cut height. Otherwise, make narrower cuts and mow slowly. ALWAYS
MAKE SURE THAT THE BLADE IS SHARP.
WARNING
Always remove the battery pack from the mower after finishing work.
23