Publicité
Les langues disponibles
Les langues disponibles
14
Declaration of conformity and incorporation
14.1
Declaration of Incorporation in accordance with the EC
Machinery Directive 2006/42/EC
Manufacturer's declaration of incorporation (translation of the original)
For the installation of partly completed machinery in terms of the EC Machinery Directive 2006/42/EC,
We hereby declare that the following partly completed machinery – as far as possible with respect to
the scope of supply – complies with the essential requirements of the EC Machinery Directive. The
partly completed machinery is only intended to be incorporated into a door system in connection with
the door drives specified below, to thus form a complete machine within the meaning of the
EC Machinery Directive. The door system must not be put into service until the final machinery has
been declared in conformity with the provisions of the EC Machinery Directive and the EC Declaration
of Conformity according to Annex II A is available. We furthermore declare that the relevant technical
documentation for this partly completed machinery has been compiled in accordance with Annex VII,
Part B, and undertake to transmit it through our Documentation Department in response to a
Product model / product:
Product type:
Year of manufacture from:
Relevant EC/EU directives:
Applied harmonised
standards:
Other applied technical
standards and specifications:
Manufacturer and name of
the authorised representative
of the technical
documentation:
Place and date of issue:
14.2
Declaration of Conformity according to Directive 2014/53/EU
The integrated radio system complies with directive 2014/53/EU. The full text of
the declaration of conformity can be found at:
https://www.tormatic.de/dokumentation/
Annex II Part 1 Section B
reasoned request by the competent national authorities.
W-800
Garage drive
2019
•
2014/30/EU
•
2011/65/EU
EN ISO 12100:2010; EN ISO 13849-1:2015, PL "C" Cat. 2;
EN 60335-1:2012 (as applicable); EN 61000-6-3:2007 / A1:2011;
EN 61000-6-2:2005 / AC:2005;
EN ISO 13850:2008; EN 60204-1:2006/AC:2010;
EN 617:2001+A1:2010; EN 618:2002+A1:2010
EN 300220-1:2017-05; EN 300220-2:2017-05;
EN 301489-1:2017; EN 12453:2017;
EN 60335-2-95:2015-01 / A1:2015-06
Novoferm tormatic GmbH
Eisenhüttenweg 6
44145 Dortmund
Dortmund,
24.11.2018
Dirk Gößling, Managing Director
EN - 79
Publicité
