12
Disassembly / disposal
12.1
Disassembly
Disassembly is carried out in reverse order of the assembly instructions in the In-
stallation chapter.
12.2
Disposal
For disposal, disassemble the door system and separate it into its individual ma-
terial groups:
• plastics
• non-ferrous metals (e.g. copper scrap)
• electric scrap (motors)
• steel
Dispose of all materials according to the national legislation! Dispose of pack-
aging material in an environmentally friendly way and in accordance with the ap-
plicable local disposal regulations.
The symbol with the crossed-out waste bin on waste electrical or electronic
equipment stipulates that this equipment must not be disposed of with the house-
hold waste at the end of its life. You will find collection points for free return of
waste electrical and electronic equipment in your vicinity. The addresses can be
obtained from your municipality or local administration. The separate collection of
waste electrical and electronic equipment aims to enable the re-use, recycling
and other forms of recovery of waste equipment as well as to prevent negative ef-
fects for the environment and human health caused by the disposal of hazardous
substances potentially contained in the equipment.
In the European Union, batteries and accumulators must not be treated as
domestic waste, but must be disposed of professionally in accordance with direct-
ive 2006/66/EC of the European Parliament and of the Council of 6 September
2006 on batteries and accumulators. Please dispose of batteries and accumulat-
ors according to the relevant legal requirements.
13
Warranty terms
Please note that the scope of the warranty is restricted to private use of the sys-
tem. We define private use as a maximum of 10 cycles (OPEN/CLOSE) per day.
The full text of the warranty terms can be found at:
https://www.tormatic.de/garantiebestimmungen
78 - EN