tormatic W-800 Mode D'emploi page 68

3. Press the programming button (PROG button) (D).
ð In setting 0, 1, 2 and 5 value "H" is displayed. Continue with menu "H".
ð In setting 6, 7, 8 and 9 value "A" is displayed. Continue with menu "A".
WARNING
Impact and crush hazard due to automatic door movement!
Make sure that no persons stand in the movement area of the door
because it may start unexpectedly.
4.9.6 Menu A: Set open time
Only in conjunction with function "Automatic close".
1. Select menu item "A".
ð After approximately 2 seconds, the display flashes and shows the set
value of the operating mode.
2. If desired, adjust the setting with the aid of the OPEN (B) and CLOSE (C) but-
tons.
Value Open time
0 0 s
1 10 s
2 30 s
3 60 s
4 90 s
5 120 s
6 150 s
7 180 s
8 210 s
9 240 s
3. Press the programming button (PROG button) (D).
ð The value "H" is displayed.
66 - EN