PNI HOUSE AHD1250 Manuel Utilisateur page 2

EN
MAIN FUNCTIONS
Real time surveillance
Surveillance via monitor: Analog output interface, VGA or HDMI
Storage
The HDD works only during recording, which reduces energy consumption and extends life
Note: The HDD is not included
Compression
Real-time compression on the storage device, which allows stable audio and video quality
Backup
Via the USB interface: on USB storage devices
Playback
Real time recording
Multiple play mode: 1 or 4 channels on the screen
Zoom on certain areas of the image
Communication interface
Standard internet interface
Intelligent operation
Control device from the mouse
Quickly copy settings from one channel to another
INSTRUCTIONS FOR USE
Installing the storage unit
At first use, please install the storage unit. A single internal HDD of 6TB capacity (the HDD is not
included in the package) can be installed in the recording unit casing.
• Unscrew the screws
• Remove the lid
• Fix the HDD
• Connect the data cables
• Fix the lid
• Connect the power cord
Starting the device
Plug the power cord and turn on the device. The LED will turn on and you will hear a beep. By
default, 4 channels will be displayed on the screen.
If the start time falls within the preset recording schedule, then the recording function will start
automatically.
Notes:
1. Check that the input voltage corresponds to the recommended device voltage. The power
supply voltage is 230V ± 10% / 50Hz.
2. We suggest using a UPS to protect the device from voltage variations.
2