cecotec OLLA GM H FRY Manuel D'instructions page 39

ENGLISH
- Do not immerse the product in water or other liquid.
- Make sure the product is completely dry before storing or using it again.
Note
The inner pot is dishwasher safe, but it is recommended to wash it by hand to keep the coating
in better condition for a longer period of time.
- Use a soft, damp cloth to clean the product's outside surface.
- Do not use abrasive cleaners or scouring pads to clean the product.
- Do not immerse the main body of the product or the power cord in water or any other liquid.
- Clean the base of the product with a dry, soft cloth.
After cleaning
Make sure to place the silicone sealing ring correctly back into position.
Check pressure and valves and make sure they are working properly.
Make sure that all components are correctly installed in position and completely dry before
using the product again.
Safety
The programmable cooker has 14 interlocking safety systems that operate simultaneously.
The exclusive safety valve system prevents your cooker from opening as long as there is
pressure inside, therefore, to open or close your cooker, it is essential that we eliminate the
steam inside by placing the pressure valve in the open position. Fig. 14
The product is designed so that the cooker and the air-frying component work independently
in an automatic manner. When the air-frying component is in operation, the cooker cannot
operate and vice versa.
Handle the air-frying component as well as the inner pot with heat-resistant gloves and place
both objects on a heat-resistant surface.
76
OLLA GM H FRY
7. TROUBLESHOOTING
Abnormal operation
COOKER
The cooker does not reach pressure
Remarks:
Ollas GM cookers can work with
pressure as long as the conditions
require it. This depends on several
factors, amount of liquids, solids, oil in
the tank, as well as room temperature
and the temperature of the contents.
Do not confuse pressure build-up
with the fact that it cooks and works
properly. If the cooker has heated up
and cooked within the selected time,
it functions correctly, and no error can
be determined.
The cooker does not turn on.
The cooker does not heat up Add 1 litre
of water and select the oven menu at
200 ºC for 10 minutes.
Pressure switch fails. Contact the
Technical Support Service.
ENGLISH
Solution
- Check that the back lid and the silicone ring
are correctly placed.
- Check that the pressure valve is in the closed
position.
- Check that the safety valve is correctly
positioned.
- Press down hard on the lid after turning it to
close.
- Add 1 litre of water, select the Pressure
menu, 20 minutes, medium pressure, 200 ºC
and cook. Do this also with the Steam and
Pressure menus. If the pressure builds up, the
cooker works properly. If the pressure builds
up, the cooker works properly.
- In order for the cooker to have pressure, the
selected temperature must be over 130ºC and
have enough liquid in the inner pot.
- Try another cable (desktops have the same
cable). Can the cooker be opened while
cooking?
- Circuit fault Contact the Technical Support
Service The cooker does not speak.
- Check by using another socket.
- See point 6 and verify the configuration. If
the problem persists, contact the Technical
Support Service.
As long as the cooker has not reached pressure,
although it is advisable not to open it as it will
release the steam.
E3 error on the digital display Overheating.
Contact the Technical Support Service.
OLLA GM H FRY
77