Bosch 0.601.076.200 Notice Originale page 15

14 | English
Safety Notes
en
Have the measuring tool repaired only through quali-
fied specialists using original spare parts. This ensures
that the safety of the measuring tool is maintained.
Do not operate the measuring tool in explosive atmos-
pheres, such as in the presence of flammable liquids,
gases or dusts. Sparks can be created in the measuring
tool which may ignite the dust or fumes.
When using the angle information provided by this tool
to cut workpieces, always strictly observe the safety
and working instructions of the saw being used, includ-
ing those for positioning and clamping the workpiece.
When the required angles can not be set on a certain saw
or saw type, alternative sawing methods will need to be
applied. Extremely acute (sharp) angles can be cut using
a taper jig with a table saw or a circular saw.
Functional Description
Please unfold the fold-out page with the representation of
the measuring tool and leave it unfolded while reading the
operating instructions.
Intended Use
The measuring tool is intended for measuring and transfer-
ring angles, for calculating simple and double mitre angles,
as well as for checking and aligning horizontal and vertical
lines. It is suitable for indoor and outdoor use.
Product Features
The numbering of the product features shown refers to the
illustration of the measuring tool on the graphic page.
1 Fold-out leg
2 Serial number
3 Leg extension
4 Base leg
5 Battery lid
6 Display
7 Spirit level for horizontal alignment
8 Spirit level for vertical alignment
9 "Recall / Hold" button
10 "On / Clear / Off, Simple MTR" button
11 "Compound MTR" button
Display Elements
a Reading
b Battery low indicator
c Spring angle indicator "SPR"
d Corner angle indicator "CNR"
e Mitre angle indicator "MTR"
f Bevel angle indicator "BVL"
g Memory indicator "HOLD"
1 609 929 T80 | (17.4.09)
All instructions are to be read. SAVE THESES
INSTRUCTIONS FOR FUTURE REFERENCE.
Bosch Power Tools