Window Kit Installation; Installation Instructions - Danby DPAC120090 Guide D'utilisateur

LOCATION
Fig. D
30cm/
1 ft
WINDOW KIT
INSTALLATION
The window kit has been designed to fit most standard "vertical" and "horizontal" window
applications; however, it may be necessary to improvise or modify some aspects of the
installation procedures for unique window types.
Horizontal Windows: Minimum & Maximum
Horizontal
window
Window Slider Kit:
Minimum: 67.5cm (2.22ft)
Maximum: 123cm (4.04ft)
Fig. E
NOTE: If the window opening is less than the stated minimum length of the window slider kit,
cut the exhaust slider (the one with the oval shaped hole) shorter in order to fit it to the
window. If you are going to cut, do not compromise the integrity (shape) of the factory cut hole
in the slider, as this would make proper ventilation impossible.

INSTALLATION INSTRUCTIONS

• The air conditioner should be placed on a firm
foundation to minimize noise and vibration. For safe
and secure positioning, place the unit on a smooth,
level floor that is strong enough to support the unit.
• The unit has castors to aid placement, but if
should only be rolled on smooth, flat surfaces. Use
caution when rolling on carpet surfaces. Do not
attempt to roll the unit over any objects.
• Never place any obstacles around the air inlet or
outlet of the unit.
30cm/
• Give at least 30 cm (1 ft) of free space between
1 ft the wall and the unit to allow for efficient
air-conditioning.
Vertical Windows: Minimum & Maximum
Fig. F
Vertical
window
Window Slider Kit:
Minimum: 67.5cm (2.22ft)
Maximum: 123cm (4.04ft)
4