Publicité
Les langues disponibles
Les langues disponibles
connects to the car body ground ( - ).
•
Make sure all the connections are routed away from any
potentially pinching or slicing other metallic parts.
•
Slowly slide the radio into the sleeve until it locks in place.
•
The rubber ring will act as a seal against DIN Sleeve. At the
left and right sides of the ring a slot space will be provided
by pulling slowly the left and right side of the ring.
4.4. Removing the radio from DIN Sleeve
If you plan to remove the radio from DIN Sleeve, you should do it
using the provided two removal keys as explained below:
•
Fully insert both removal keys straight into the slot spaces
provided by rubber ring on the left and the right edges of
the radio front panel.
•
You cannot remove the radio if only one key is used.
•
Press in fully and the radio will unlock from the sleeve
making withdrawal from the sleeve possible.
•
Store the keys in a safe place for future use.
34
Publicité
