Publicité
Les langues disponibles
Les langues disponibles
PROBLEM
Program does not
start after closing
the door.
Programme
cannot be started
or selected.
Water in the
machine.
Machine vibrates
or makes noise.
TROUBLESHOOTING
POSSIBLE CAUSE
- Start / Pause / Cancel
button was not pressed.
- Washing machine has
switched to self protec-
tion mode due to a
supply problem (line
voltage, water pressure,
etc.).
-Some water might have
remained in the product
due to the quality control
processes in the produc-
tion.
- Machine might be
standing unbalanced.
- A hard substance
might have entered into
the pump filter.
- Transportation safety
bolts are not removed.
- Laundry quantity in the
machine might be too
little.
- Machine might be
overloaded with laundry.
- Machine might be
leaning on a rigid item.
SOLUTION
- Press the Start / Pause
/ Cancel button.
- To cancel the
programme, turn the
Programme Selection
knob to select another
programme. Previous
programme will be
cancelled. (See "Cancel-
ing the programme")
-This is not a failure;
water is not harmful to
the machine.
- Adjust the feet to level
the machine.
- Clean the pump filter.
- Remove the transporta-
tion safety bolts.
- Add more laundry to the
machine.
- Take out some of the
laundry from the machine
or distribute the load by
hand to balance it
homogenously in the
machine.
- Make sure that the
machine is not leaning on
anything.
Publicité
