Publicité
Les langues disponibles
Les langues disponibles
Changing the selections after programme has
started Switching the machine to pause mode
Press the Start / Pause button to switch the machine to pause mode
while a programme is running. The light of the step which the machine
is in starts flashing in the Programme Follow-up indicator to show that
the machine has been switched to the pause mode.
Also, when the loading door is ready to be opened,procedure step
light is steady on, door lock light is off.
Changing the speed and temperature settings for auxiliary
functions
Depending on the step the programme has reached, you may cancel
or activate the auxiliary functions; see, "Auxiliary function selection".
You may also change the speed and temperature settings;see, "Spin
speed selection" and "Temperature selection".
If no change is allowed, the indicator light will be on.
Adding or taking out laundry
Press the Start / Pause button to switch the machine to pause mode.
The programme follow-up light of the relevant step during which the
machine was switched into the pause mode will flash. Wait until the
Loading Door can be opened.
Open the Loading Door and add or take out the laundry.
Close the Loading Door. Make changes in auxiliary functions,tempera-
ture and speed settings if necessary. Press Start /Pause button to
start the machine.
Canceling the programme
After the program starts, to cancel the program or switch to a new
program, there are the following two operations:
1. Directly turn the knob to the off position. At this time, the machine
enters the off state, and the original program is directly canceled.
Turn the knob again to select a new program.
2. Press the start/pause button, turn the knob to select another
program, and the original program will be canceled.
Depending on the step where the programme was
canceled in, you may have to put detergent and softener
again for the programme you have selected anew.
End of programme
"End" appears on the display at the end of the programme.
Wait until the loading door light illuminates steadily. Press On / Off
button to switch off the machine. Take out your laundry and close the
loading door. Your machine is ready for the next washing cycle.
33
Publicité
