Publicité
Les langues disponibles
Les langues disponibles
Removing the transportation locks
WARNNING: Do not remove the transportation locks
before taking out the packaging reinforcement.
WARNNING: Remove the transportation locks
before operating the washing machine! Otherwise, the
product will be damaged.
Loosen all the bolts with a suitable spanner
until they rotate freely (C).
Remove transportation safety bolts by turn-
ing them gently.
Attach the plastic covers supplied in the
User Manual bag into the holes on the rear
panel. (P)
Keep the transportation safety bolts in a safe place to
reuse when the washing machine needs to be moved
again in the future.
Never move the product without the transportation
safety bolts properly fixed in place!
Connecting water supply
The water supply pressure required to run the prod-
uct is between 1 to 10 bars (0.1 – 1 MPa). It is
necessary to have 10 – 80 liters of water flowing
from the fully open tap in one minute to have your
machine run smoothly.
Attach a pressure reducing valve if water pressure is
higher.
Publicité
