Publicité
Les langues disponibles
Les langues disponibles
Cleaning the loading door and the drum
For products with drum cleaning programme, please see
Operating the product - Programmes.
For products without drum cleaning, follow the below steps t
the drum:
Select
Additional Water
Cottons
programme
Set
the temperature to the level recommended on the drum clean-
ing agent which can be provided from authorized services.
this procedure
programme,put 1 pouch of special drum cleaning agent (if the special
agent could not be supplied, put max. 100 g of powder anti-limescale)
into the main wash detergent compartment(compartment no. "2"). If
the anti-limescale is in tablet form,put only one tablet into the main
wash compartment no. "2".
Dry the inside of the bellow with a clean piece of cloth after the
programme has come to an end.
Repeat Drum Cleaning process in every 2 months.
Use an anti-limescale suitable for the washing machines.
After every washing make sure that no foreign substance is left in the
drum.
If the holes on the bellow shown in the figure is blocked,open the
holes using a toothpick.
Foreign metal substances will cause rust stains in the drum.
Clean the stains on the drum surface by using cleaning
agents for stainless steel. Never use steel wool or wire
wool.
WARNING:Never use sponge or scrub materials. These
will damage the painted and plastic surfaces.
or
Extra Rinse
without pre-wash.
without any laundry in the product.
auxiliary functions. Use a
3
o clean
Apply
Before starting the
Publicité
