Publicité
Les langues disponibles
Les langues disponibles
Press Start / Pause button. The delayed start time you have set is
displayed. Delayed start countdown starts. The':' in the display time
blinks once every second, and the time gradually decreases.
Additional laundry may be loaded during the delayed start
period.
At the end of the countdown, duration of the selected programme will be
displayed. ':'symbol will disappear and the selected programme will start.
Canceling the Delayed Start function
If you want to cancel the delayed start countdown and start the
programme immediately:
Set the Delayed Start period to zero or turn the Programme Selection
knob to any programme. Thus, Delayed Start function will be canceled.
The End/Cancel light flashes continuously. Then, select the programme
you want to run again. Press Start / Pause button to start the programme.
Starting the programme
Press Start / Pause button to start the programme.
Programme follow-up light showing the startup of the programme will turn
on.
If no programme is started or no key is pressed within 10
minuted durning programme selsction process,the machine
will switch to turn off mode and the temperature,speed and
other lights will turn off.
Cancel/Switch Programs
After the program starts, to cancel the program or switch to a new
program, there are the following two operations:
1. Directly turn the knob to the off position. At this time, the machine
enters the off state, and the original program is directly canceled. Turn
the knob again to select a new program;
2. Press the start/pause button, turn the knob to select another program,
and the original program will be canceled.
Child Lock
Use Child Lock function to prevent children from tampering with the
machine. Thus you can avoid any changes in a running programme.
If the Programme Selection knob is turned when the Child
Lock is active, " " appears on the display. The Child Lock
does not allow any change in the programmes and the
selected temperature, speed and auxiliary functions.
Even if another programme is selected with the Programme
Selection knob while the Child Lock is active, previously
selected programme will continue running.
Publicité
