Publicité
Les langues disponibles
Les langues disponibles
In order to clean the dirty filter and discharge the water:
1. Unplug the machine to cut off the supply power.
WARNING:Temperature of the water inside the machine
may rise up to 90 ºC. To avoid burning risk, filter must be
cleaned after the water in the machine cools down.
2. Open the filter cap.
WARNING:You can remove the filter cover by slightly
pushing downwards with a thin plastic tipped tool, through
the gap above the filter cover. Do not use metal tipped tools
to remove the cover.
3.Follow the steps below to drain the water：
a. Place a large container in front of the filter to catch water from the
filter.
b. Loosen pump filter (anticlockwise) until water starts to flow. Fill the
flowing water into the container you have placed in front of the filter.
Always keep a piece of cloth handy to absorb any spilled water.
c. When the water inside the machine is finished, take out the filter
completely by turning it.
4. Clean any residues inside the filter as well as fibers, if any, around
the pump impeller region.
5. Install the filter.
6. If the filter cap is composed of two pieces, close the filter cap by
pressing on the tab. If it is one piece, seat the tabs in the lower part
into their places first, and then press the upper part to close.
3
Publicité
