California CLLFS6FW-11 blanc Notice D'utilisation page 65

WARNING : Models with a single water inlet should not be
connected to the hot water tap. In such a case the laundry
will get damaged or the product will switch to protection
mode and will not operate.
WARNING : Do not use old or used water inlet hoses on
the new product. It may cause stains on your laundry.
Tighten all hose nuts
by hand. Never use a
tool when tightening
the nuts.
Open the taps completely after making the
hose connection to check for water leaks at the
connection points. If any leaks occur,
turn off the tap and remove the nut. Retighten
the nut carefully after checking the seal. To pre-
vent water leakages and damages
caused by them,keep the taps closed when the
machine is not in use.
Connecting to the drain
The end of the drain hose must be directly
connected to the wastewater drain or to the
washbasin.
WARNING : Your house will be flooded if the hose comes
out of its housing during water discharge. Moreover, there
is risk of scalding due to high washing temperatures!
To prevent such situations and to ensure smooth water
intake and discharge of the machine, fix the end of the
discharge hose tightly so that it cannot come out.
1