Initial Settings; Adjusting Initial Settings; Setting The Time - Pioneer DEH-P8400MP Mode D'emploi

Section

Initial Settings

08

Adjusting initial settings

1
Initial settings lets you perform initial set up of
different settings for this unit.
1
display
FUNCTION
Shows the function status.
1 Press
SOURCE
off.
2 Press
OPEN
3 Press
FUNCTION
appears in the display.
4 Press
FUNCTION
settings.
Press
FUNCTION
the following settings:
—
CLOCK WARN
— —
BRIGHT SW
Use the following instructions to operate each
particular setting.
• To cancel initial settings, press
• You can also cancel initial settings by holding
down
FUNCTION
44 En
and hold until the unit turns
to open the front panel.
and hold until
CLOCK
to select one of the initial
repeatedly to switch between
— — —
D OPEN AUX DIM
—
TEL DISP
BAND
until the unit turns off.

Setting the time

This is used to set the time on the unit's clock
display.
1 Press
2 Press
Press
FUNCTION
display.
3 Select the portion of the time display you
wish to set with 2/3.
Pressing 2/3 will select a portion of the clock
display:
—
HOUR MINUTE
As you select portions of the clock display the
portion selected will blink.
4 Select the correct time with 5/∞.
Pressing 5 will increase the selected hour or
minute. Pressing ∞ will decrease the selected
hour or minute.
—
.
to open the front panel.
OPEN
to select
FUNCTION CLOCK
until the time appears in the
.