Understanding Built-In Cd Player Error Messages; About Folders And Mp3 Files - Pioneer DEH-P8400MP Mode D'emploi

Masquer les pouces Voir aussi pour DEH-P8400MP:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Additional Information
Understanding built-in CD player
error messages
When problems occur during CD play an error
message may appear on the display. If an error
message appears on the display refer to the
table below to see what the problem is and the
suggested method of correcting the problem. If
the error cannot be corrected, contact your
dealer or your nearest Pioneer Service Center.
Message
Cause
ERROR-11, 12,
Dirty disc
17, 30
ERROR-11, 12,
Scratched disc
17, 30
ERROR-22, 23
The CD format
cannot be
played back
ERROR-10, 11,
Electrical or
12, 17, 30, 50,
mechanical
A0
ERROR-44
All tracks are
skip tracks

About folders and MP3 files

• An outline of a CD-ROM with MP3 files on it is
shown below. Subfolders are shown as folders
in the folder currently selected.
Action
Clean disc.
Replace disc.
Replace disc.
Turn the ignition
ON and OFF, or
switch to a
different source,
then back to the
CD player.
Replace disc.
• The equipment assigns folder numbers. The
user can not assign folder numbers.
• When playing discs with MP3 files and audio
data (CD-DA) such as CD-EXTRA and MIXED-
MODE CD, both types can be played only by
switching mode between MP3 and CD-DA
with
• It is not possible to check folders that do not
include MP3 files. (These folders will be
skipped without displaying the folder num-
ber.)
• MP3 files in up to 8 tiers of folders can be
played back. However, there is a delay in the
start of playback on discs with numerous
tiers. For this reason we recommend creating
discs with no more than 2 tiers.
• It is possible to play back up to 253 folders on
one disc.
First Second Third
level
level
level
Notes
.
BAND
Section
10
En
55

Publicité

Chapitres

Table des Matières
loading

Table des Matières