About The Demo Mode; Reverse Mode; Feature Demo; Motion Demo - Pioneer DEH-P8400MP Mode D'emploi

Section
Before You Start
01

About the demo mode

This product features three demonstration
modes:

Reverse mode

.

Motion DEMO

Reverse mode
If you do not perform an operation within about
30 seconds, screen indications start to reverse,
and then continue reversing every 10 seconds.
Pressing 5 numbered button when power to this
product is switched off while the ignition switch
is set to ACC or ON cancels the
Pressing 5 numbered button again to start the
.
Reverse mode

Feature DEMO

Pressing 4 numbered button when power to this
product is switched off while the ignition switch
is set to ACC or ON starts the
14 En
, and
Feature DEMO
Reverse mode
.
Feature DEMO
Motion DEMO
Pressing 6 numbered button when power to this
product is switched off while the ignition switch
is set to ACC or ON starts the
the
Motion DEMO
opens/closes automatically in each about 30
minutes.
Notes
• Remember that if the
continues operating when the car
DEMO
engine is switched off, it may drain battery
.
power.
• The red lead (ACC) of this product should be
connected to a terminal coupled with ignition
switch on/off operations. If this is not done,
the vehicle battery may be drained.
•
Feature DEMO
OFF initially. If you turn off the ignition switch
or power to this product is switched off,
Feature DEMO
automatically.
Motion DEMO
is set to ON, front panel
or
Feature DEMO
and are set to
Motion DEMO
and return to off
Motion DEMO
. If
Motion