Using Its Playlists; Creating A Playlist With Its Programming; Playback From Your Its Playlist - Pioneer DEH-P8400MP Mode D'emploi

Section
Multi-CD Player
06

Using ITS playlists

ITS (instant track selection) lets you make a
playlist of favorite tracks from those in the multi-
CD player magazine. After you have added your
favorite tracks to the playlist you can turn on ITS
play and play just those selections.
Creating a playlist with ITS program-
ming
You can use ITS to enter and playback up to 99
tracks per disc, up to 100 discs (with the disc
title). (With multi-CD players sold before the
CDX-P1250 and CDX-P650, up to 24 tracks can
be stored in the playlist.)
1 Play a CD that you want to program.
Press 5 or ∞ to select a CD.
2 Press
OPEN
3 Press
FUNCTION
appears in the display, then press
to select .
ITS
After is displayed, press
TITLE
repeatedly, the following functions appear in the
display:
(disc title input)—
TITLE
4 Select a desired track by pressing 2 or 3.
5 Press 5 to store the currently playing track
in the playlist.
is displayed briefly and the currently
ITS Input
playing selection is added to your playlist. The
display then shows
6 Press
BAND
play.
32 En
to open the front panel.
and hold until
TITLE
FUNCTION
FUNCTION
(ITS programming)
ITS
again.
ITS
to return to the playback dis-
Note
• After data for 100 discs has been stored in
memory, data for a new disc will overwrite the
oldest one.

Playback from your ITS playlist

ITS play lets you listen to the tracks that you
have entered into your ITS playlist. When you
turn on ITS play, tracks from your ITS playlist in
the multi-CD player will begin to play.
1 Select the repeat range.
Refer to Repeating play on page 30.
2 Press to open the front panel.
OPEN
3 Press to select
FUNCTION
Press until
FUNCTION
display.
4 Press 5 to turn
ITS play
appears in the display. Playback
ITS Play :ON
begins of those tracks from your playlist within
the previously selected
repeat) or (disc repeat) ranges.
DISC
• If no tracks in the current range are
programmed for ITS play then
displayed.
5 Press ∞ to turn
ITS play
appears in the display. Playback
ITS Play :OFF
will continue in normal order from the currently
playing track and CD.
.
ITS-P
appears in the
ITS-P
on.
(multi-CD player
MCD
is
ITS Empty
off.