Using Its Playlists - Pioneer SUPER TUNER III D FH-P5000MP Mode D'emploi

Section
08 Multi-CD Player
Pausing CD playback
Pause lets you temporarily stop playback of
the CD.
1 Press FUNCTION to select Pause.
Press FUNCTION until Pause appears in the
display.
2 Push Multi Control up to turn pause on.
Pause:ON appears in the display. Play of the
current track pauses.
3 Push Multi Control down to turn pause
off.
Pause:OFF appears in the display. Play will re-
sume at the same point that you turned pause
on.

Using ITS playlists

ITS (instant track selection) lets you make a
playlist of favorite tracks from those in the
multi-CD player magazine. After you have
added your favorite tracks to the playlist you
can turn on ITS play and play just those selec-
tions.
Creating a playlist with ITS
programming
You can use ITS to enter and play back up to
99 tracks per disc, up to 100 discs (with the
disc titles). (With multi-CD players sold before
the CDX-P1250 and CDX-P650, up to 24 tracks
can be stored in the playlist.)
1 Play a CD that you want to program.
Push Multi Control up or down to select the
CD.
34
En
2 Press FUNCTION and hold until Title In
appears in the display, then press
FUNCTION to select ITS.
After Title In is displayed, press FUNCTION re-
peatedly, the following functions appear in the
display:
Title In (disc title input)ITS (ITS program-
ming)
3 Select the desired track by pushing
Multi Control left or right.
4 Push Multi Control up to store the cur-
rently playing track in the playlist.
ITS IN is displayed briefly and the currently
playing selection is added to your playlist. The
display then shows ITS again.
5 Press BAND to return to the playback
display.
Note
After data for 100 discs has been stored in mem-
ory, data for a new disc will overwrite the oldest
one.
Playback from your ITS playlist
ITS play lets you listen to the tracks that you
have entered into your ITS playlist. When you
turn on ITS play, tracks from your ITS playlist
in the multi-CD player will begin to play.
1 Select the repeat range.
Refer to Repeating play on page 32.
2 Press FUNCTION to select ITS.P.
Press FUNCTION until ITS.P appears in the
display.