Publicité
Wall-Mounting the 4606 IP Telephone
Follow these steps to attach the small stand to a 4606 IP telephone:
1. Remove the handset hook from the handset cradle. Flip the hook 180 degrees and re-insert
it so that the hook edge is facing upward. This keeps the telephone handset in place while it
hangs on a wall.
2. Place the moveable tab on the thicker end of the stand into the slot at the bottom of the back
side of the 4606 IP telephone.
3. Push down on the stand toward the top of the telephone, and place the tab on the thinner
end of the stand into the slot at the top of the 4606 IP telephone.
4. Plug the telephone's foot-long CAT 5 line cord into the primary Ethernet line interface jack
(identified by an icon on the left that looks like a modular wall jack).
5
Publicité
