Installation
Recommended Installation Position
Examples of correct camera installation on the
rear of the vehicle
Installation position
~
KENWOOD
1~
Mount so that the
"KENWOOD"
logo
appears
at the top.
Installing the Camera/Adjusting its angle
1
Decide the camera installation position.
2
Clean the camera installation surface.
Using a commercially available cleaner, wipe dirt,
moisture and oil away from the surface on which
the
camera bracket is to be attached.
3
If
required,
separate the camera bracket from
the
camera
and adjust the shape according
to the surface on which it will be
attached.
B e ~ n d
Adjust the camera
bracket shape so
that it fits the camera
installation position.
Camera bracket
4
Mount the
camera
on the camera bracket.
Screw
(M3 x 5 mm)
6
English
Secure the camera to the camera
bracket with the mounting
screw. (2 locations on each side)
Mount so that the "KENWOOD"
logo
appears at the top.
The camera has two securing holes at the side at
the top and bottom.
Please adjust according to the installation.
I n s t a l l . : - • ~
- - -
.~
S
Fix the camera temporarily with tape, etc.
Using a piece of tape, etc., fix
the
camera
temporarily.
\
12~45
I
I
r~
OK
I
I
NG
~
I
I
I
I
Install
the camera at the center of the vehicle and
not to hide the number plate. And also install
straight toward
the
forward/reverse direction
of the vehicle. Be careful not to lean the camera
toward other directions of the vehicle, etc.
6
Complete all of the required connections.
7
Display the camera video.
Before viewing the camera, apply the parking
brake and chock
the
wheels so that the vehicle
will not move. Otherwise, an unexpected
accident may result.
For displaying the camera video, read the
instruction manual for your video monitor.
Change the shift lever to the R (Reverse)
range
to
view the image of the rear of the vehicle.
8
Adjust the camera
angle.
When adjusting the camera angle, be careful not
to stretch
the
camera cord.
Adjust the angle so
that
the rear of the vehicle
or the bumper can be seen at the bottom of the
monitor.
Vehicle rear part or bumper