Yellow/black
If you use a cellular telephone, connect it via the Audio Mute lead on the cel-
lular telephone. If not, keep the Audio Mute lead free of any connections.
Front output
Blue/white
To system control terminal of the power
amp (max. 300 mA 12 V DC).
Blue/white (6*)
Blue/white (7*)
To Auto-antenna relay con-
trol terminal (max. 300 mA
12 V DC).
The pin position of the ISO connector will differ
depends on the type of vehicle. Connect 6* and 7*
when Pin 5 is an antenna control type. In another
type of vehicle, never connect 6* and 7*.
Front speaker
Left
Subwoofer
Use this for connections
when you have the sepa-
rately available amplifier.
Connecting cords
with RCA pin plugs
(sold separately)
+
≠
+
≠
Note:
When a subwoofer is connected to this unit instead of a rear
right speaker, do not connect the rear left speaker lead to any-
thing. For details, refer to the Initial Setting Menu in the
Operation Manual.
Power amp
(sold separately)
Power amp
(sold separately)
System remote control
+
Front speaker
≠
Right
+
Subwoofer
≠
Fig. 2
4