Becker Centronic SunWindControl SWC445-II Notice De Montage Et D'utilisation page 24

Problem
Drive is not functioning.
Automatic drive commands are not
executed.
System does not extend automatic-
ally when slide switch is set to " ".
System does not extend manually
when slide switch is set to " " or " ".
Required system does not extend.
24 - en
What to do if...?
Insert a new battery.
Insert the battery correctly.
Reduce distance from receiver.
Transmitter is not programmed in re-
ceiver.
Program transmitter.
Set the slide switch to " ".
The automatic sun protection func-
tion was interrupted by a manual
drive command. Move the slide
switch from " " to " " and back to
" ".
Adjust sun threshold value.
Wait for the wind to die down.
Wind threshold value exceeded. Wait
for the wind to die down.
Select correct channel.
Remedy