Becker Centronic SunWindControl SWC445-II Notice De Montage Et D'utilisation page 17

• The operator is not protected from interference from other telecommu-
nications systems and terminal equipment (e.g. even from radio-con-
trolled systems which are properly operated in the same frequency
range).
• Only connect radio receivers to devices and systems approved by the
manufacturer.
•
Ensure that the control unit is not installed or operated
close to metal surfaces or magnetic fields.
•
Radio-controlled systems transmitting on the same fre-
quency may cause reception interference.
•
Note that the range of the radio signal is limited by legis-
lation as well as by design.
Explanation of displays and buttons
12
11
1. Setting tool
2. Wind threshold regulator
3. Sun threshold regulator
4. RETRACT button
5. STOP button
6. EXTEND button
10
9
7. Channel selection button
8. Channel indicator lamps
9. Slide switch
10. Programming button
11. Labelling field
12. Type plate
4
5
6
7
8
17 - en
1
2
3