Publicité
Les langues disponibles
Les langues disponibles
B
Product usage
4.
Dismantle the bottom hinge, hole caps and screws, Install the bottom hinge shaft on other
side of the bottom hinge, then install the hinge on the other side.
screw
screw cap
5.
Dismantle the screws, sleeve pipe and stopper on the lower end cover of the two door
bodies, and install them successively on the other side of the door bodies (the stopper
needs to be replaced from the additional bag). Then remove the upper end cover of the
cooler door and switch the wire harness with a sleeve pipe to the other side of the door
body. Finally install the sleeve pipe of the upper hinge on the cooler door in the hole on
the other side of upper end cover of the cooler door.
hole cap
8
EN
shaft
shaft
sleeve pipe
stopper
screw
Publicité
